Tandberg Data
Chapter 3 - Operation
Autoloader Options
The number of possible values for each Autoloader Option setting varies among the
entire Autoloader Option list. All of these values for each menu option of the
Autoloader Options menu are provided on the next page.
Unload Mode
[= Implicit]
(2)
Implicit, Explicit
Numbering Base
[= One Base]
(2)
One Base, Zero Base
Auto Clean*
[=
Disabled]
(2)
Disabled, Enabled
* Displayed only if Cleaning Slor Selected
Loader Mode
[= Random]
(2)
Random, Sequential
Sequential Mode*
[= Normal]
(2)
Normal, Recirculate
* Displayed if selected in Loader Mode
Baud Rate
[=
115.000]
(7)
2400; 9600; 19200; 38400; 57600 and 115200
Enable Barcode
[= Disabled]
(2)
Disabled, Enabled
Enable Check Char*
[= Enabled]
(2)
Disabled, Enabled
* Displayed only if Enable Barcode is selected
Set Serial Number
[ None]*
(0)
* There is no value preset for this menu option.
Cleaning Slot
[= Disable]
(2)
Disabled, Enabled
Tandberg SLR Autoloader Service and Repair Manual
29
Autoloader Options Menu Legend:
[ ] = Example of a default setting for this menu option.
(##) = Number of selectable values for this menu option.