Tandberg Data
Chapter 4 - Configuration
Setting a Password
You can restrict access to the system by setting a password in the Setup options.
When these access codes are set, the
Load
,
Unload
,
or
Open Door
buttons will cause
an entry prompt to appear on the screen. The password also restricts access to the
Utilities and Setup menues. The System Data menu has no access restrictions.
When you enter your password correctly, the operation proceeds as normal.
Incorrect entry causes a warning message to appear for 3 seconds before the
operation is terminated.
To set a password:
1. Press the
Menu
button.
The Main Menu screen appears.
2. Select the UTILITIES menu.
The Utilities menu screen appears.
3. Select the SECURITY menu.
4. Select Set Password.
The password screen appears:
▲
CANCEL
P assw o rd : 0 000
►
ACCEPT
5. Set the password using the associated control panel buttons:
▲
Increments the number above the cursor (0–9).
►
Moves the cursor one character to the right. If the cursor is in
the last position, it reverts back to the first position.
CANCEL
Aborts the password operation.
ACCEPT
Sets the currently displayed password.
To disable a password:
To disable the password function, set its value to zero.
WARNING: If you set a password, make sure you do not forget it. If you do, it can
only be cleared with assistance from Tandberg Data technical support or by a
qualified service technician.
Tandberg SLR Autoloader Service and Repair Manual
51