Navigating Through the Menu Map
From the Main Menu screen, you can access three submenus: System Data, Setup,
and Utilities. Access the Main Menu Screen from the Default Screen.
Entering the Menu Mode
While viewing the Default screen, press the upper right control button labeled
Menu
to change the display to the Main Menu screen
.
After doing so, you will be provided
three menu options: the
SYSTEM DATA
menu, the
SETUP
menu, the
UTILITIES
menu and an Exit function. To enter one of these three menus, press the nearest
control button.
Exiting the Menu Mode
If viewing the Main Menu screen, you can exit the menu mode by pressing the
upper right control button associated with the menu option labeled
Exit
. Otherwise,
if you are viewing one of the three menus or their submenus, then continue to press
on the control button associated with the menu option labeled
Back
until the Main
Menu screen is displayed. At this time, press
Menu
control button to return the
display to the Default screen
.
System Data Menu
The System Data menu options contain the values assigned during device setup
through the identically-named option in the Setup menu’s Autoloader and SCSI
options. Besides the Setup menu options there are additional menu options data
stored in this menu’s fields (see
The SLR Autoloader Menu Map
earlier in this
chapter). The descriptions of each System Data menu option that contains a value
from the Setup menu options are discussed in
Chapter 4 – Configuration
.
Tandberg SLR Autoloader Service and Repair Manual
28
BACK
SELECT
Idle
Map : 1 _ _ 3 4 5 6 _ 8 AC
AUTOLOADER
BACK
SCSI
MAINTENANCE
BACK
DIAGNOSTIC
SECURITY
SYSTEM DATA
EXIT
SETUP
UTILITIES
Main Menu Screen
Press on the control button associated
with its menu option, either to display a
submenu or to initiate its labeled function.
System Data Submenu
Setup Submenu
Default Screen
Utilities Submenu