Taiden HCS-8600 Series, Инструкция по установке и эксплуатации

Страница: 54 / 184

Figure: Key Test interface

Mic. Test
Test the microphone of the units connected to the conference main unit, and the interface of the following figure is
displayed:
To begin the test, the user shall first set the test time for each microphone in “Mic. Test Time (00:00:00, HH:MM:SS)”,
select “Play Sound” or not (play white noise to assist testing), then click the “Start Test” button to begin. If the current
microphone is in good condition, it will be activated, and its number is shown in the “Current Microphone ID” textbox. The
remaining test time will also be shown under the textbox. The system is testing the microphones according to the
microphone IDs, in ascending order.
Note: cannot start microphone test when priority key pressed, and microphone test will be paused when priority key
pressed.
Figure: Microphone Test interface
43