Taiden HCS-8600 Series, Инструкция по установке и эксплуатации

Страница: 107 / 184

3.4.4.2 Chairman unit
The HCS-8635C chairman unit features all the
functions of a delegate unit, and the following
additional functions:
1. Priority

If the priority mode on the main unit is configured
as “All mute”, all active microphones (except VIP
units and other chairman units) will be muted
temporarily when this key is pressed and they will
restore when this key is released;

If configured as “All off”, all active microphones
(except VIP units and other chairman units) will be
turned off and the request-to-speak list will be
purged (under “Open” and “Apply” mode) when
this key is pressed.
2. Speaking

If the active microphone capacity is not full, the
chairman can activate his/her microphone normally,
the operation is the same as for the delegate unit.

If the active microphone capacity is full, the
chairman cannot activate his/her microphone. But
he/she can use the priority key to “All mute” or “All
off” other delegate microphones and give his/her
speech.
3. Controlling delegate unit
A. Approve delegate unit’s request to speak
Without PC and under “Request” mode, when a
delegate requests to speak, a ring tone will be emitted
by the built-in loudspeaker in the chairman’s unit.
“Delegate:
××
(unit ID) Requesting” will be displayed
on the LCD. The chairman can now approve delegate’s
request and activate delegate’s microphone by
pressing Yes key or reject delegate’s request by
pressing No key.
When his/her request is approved, he/she can speak
and the last activated microphone will be turn off at the
same time.
B. Turn off or mute delegate microphone
Chairman can use the “Priority” key to execute “All
mute” or “All off” operation.
4. Voting
HCS-8635C chairman unit cannot originate voting
without a PC:

When controlled by application software,
nominative or ballot voting are available;

“First key-press valid” or “Last key-press valid” are
available.
96