Taiden HCS-8600 Series, Инструкция по установке и эксплуатации

Страница: 48 / 184


Down Stream: adjust downlink audio, including loudspeaker volume, downlink bass setting, downlink treble setting,
and downlink threshold level setting:
♦
Mixer: select audio input source, the microphone audio of the conference unit is output from the downstream
audio by default; Line In 1~2, AES In 1~2, Dante In 1~2 and USB In 1~2 can select whether to output from the
downstream audio, and the output volume ratio can be set by adjusting the gain;
♦
PEQ: 8 band PEQ setting;
♦
Limiter: downstream limiter setting, bypass or enabled;
♦
Downstream volume control and level indicator.
Figure: Down Stream Setup

Scene Setting: Input, Mixer, EQ, Limiter, Delay, Output parameters and downstream audio parameters can be
saved as a scene, and then can be called next time.

Setting: includes Audio Mode Setting, Main Interface Setting Button, Enable Wide Dynamic Mode and Mic. Gain
Boost (Dante and USB);
♦
Audio Mode Setting:
Normal Mode: all input sources output through all output channels;
Teleconferencing Mode: Line In 1 does not output through Line Out 1 channel;
External Processor Mode: Line In 1 does not output through all output channels.
Normal and Teleconferencing mode:
Enable/Disable the left channel to the
downstream audio.
External Processor mode:
Only line in 1 can be output to the .
downstream audio
37