TAC I/NET 2000, Начало работы

Страница: 62 / 74

NetPlus Router Configuration I/NET Configuration
4-26 I/NET 2000 Getting Started
3. If you wish to change an existing password, enter the orig-
inal password in the
Old Password
field. If you are entering
a password for the first time, leave this field blank.
4. Type the desired password in the
New Password
field, up to
four characters.
5. Re-type the desired password in the
Verify Password
field.
This entry must match the entry in the New Password field.
6. Click
OK
to accept the new password and return to the
NetPlus Router Summary screen. You may click
Cancel
to
close the Password editor without saving the changes.
Note: To remove a password, enter the Old Password, and leave the New
Password and Verify Password fields blank.
Saving Configurations
You can save a NetPlus Router’s configuration on your hard drive.
This will allow you to view the configuration information if the
NetPlus Router is off-line, and provides a backup in case the
configuration becomes corrupted.
1. Select the desired NetPlus Router from the NetPlus Router
Summary dialog box and click
Save
.
2. You will be prompted for a password, if one has been
assigned. Enter the password and click
OK
.
Figure 4-17. NetPlus Router Password Editor