TAC I/NET 2000, Начало работы

Страница: 58 / 74

NetPlus Router Configuration I/NET Configuration
4-22 I/NET 2000 Getting Started
Selecting a NetPlus Router
This utility allows you to configure a NPR connected locally or on
the network.
To select a NetPlus Router for configuration:
1. Click the
NP Routers
button on the I/NET Configuration
Profiles dialog box. The NetPlus Router Summary screen
displays (
Figure 4-15 ).
2. If the NetPlus Router is currently connected, either directly
or via a network, make sure the
Online
option is activated
( ! ).
a. If your configuration profile specifies a
Link Type
of
NetPlus Router (refer to “Serial Port” on page 4-4 ) the
NetPlus Router connected to your serial port is listed.
This is the required mode for the initial configuration
of a NetPlus Router.
b. If your configuration profile specifies any other
Link
Type,
all NetPlus Routers available on the network are
listed.
Proceed to Step 4 .
Figure 4-15. NetPlus Router Summary