TAC I/NET 2000, Начало работы

Страница: 51 / 74

I/NET Configuration Editing Configuration Profiles
I/NET 2000 Getting Started 4-15
Warning: If I/O Server is shut down, unsolicited messages may be lost.
Peripherals
This section allows you to specify any peripheral devices attached
to the host workstation.
1. Enter the
AC Reader Type
, if any. You may attach an
optional access control reader to your workstation’s serial
port. The reader is used by I/NET’s Access Control system to
read the serial number of the access control device.
Supported reader types are listed below.
a.
I/Disc
— The I/DISC Wand is used to read the serial
number of a CSI I/DISC button.
b.
Weigand
— The Weigand card reader is used to read
the serial number from an access card using the
Weigand encoding protocol.
2. Specify the
AC Reader Port
used to attach the above device
to the workstation. Select the serial port from the drop-
down list. You
cannot specify a serial port that is already in
use by the Serial Port section. If you are not using an access
control reader, select
None
.
Note: The I/DISC Wand has an RJ11 connector and requires an adaptor.
You must use Dallas Semiconductor’s Universal 1-Wire Com Port
Adapter (CSI Part No. 602072-0010).
3. Select a
Printer port
from the drop-down list box. Only
existing ports are listed within the drop-down list. You may
configure only one printer port.
Figure 4-10. Workstation Peripherals