TAC I/NET 2000, Начало работы

Страница: 60 / 74

NetPlus Router Configuration I/NET Configuration
4-24 I/NET 2000 Getting Started
✦
Subnet Mask for your facility
✦
Domain Name (internet or intranet)
✦
Gateway IP address
✦
SNMP Host IP address (optional)
✦
DNS Service Provider IP addresses (optional)
Follow the procedure below when you have the required informa-
tion.
1. Enter the Machine Name , up to 15 characters. The name
must be alpha-numeric. The only other character allowed is
the dash (–).
2. Enter the NetPlus Router IP Address.
3. Enter the Subnet Mask .
4. Enter your Domain name.
5. Enter your LAN/WAN Gateway IP address.
6. Enter the address(es) for at least one, and a maximum of
eight,
Reference Hosts .
Refer to “TCP/IP Parameters” on page 4-9 , for a brief expla-
nation of reference hosts.
a. Select an entry in the Reference Hosts list box and
double-click, or click
Modify .
b. Enter the IP address of the desired reference host and
click
OK .
c. To enter additional remote hosts, repeat Steps a and b.
7. The DHCP function is not currently implemented. Proceed
to the next step.
8. If your network is running Simple Network Management
Protocol (SNMP), you may configure the NetPlus Router to
send a block of information (a “trap”) to a specific machine
(the “trap” host) when a specified event occurs.
a. Enter the machine name of the SNMP trap host in the
SNMP Name field.