TAC I/NET 2000, Начало работы

Страница: 36 / 74

DCUxxxx.sav File Conversion Utility I/NET Conversions
3-8 I/NET 2000 Getting Started
versions of DBCNV to “step through” the conversion levels prior to
this one.
To convert all DCU save files:
1. Open the I/NET 2000 folder on the Windows desktop.
2. Double-click on the icon for the
SAV
folder.
3. Double-click on the icon for the DBCNV51ALL.BAT file.
4. When the program is finished running (the header will say
“Finished - Dbcnv51all”), click on the X in the upper right
hand corner of the DOS window to close it.
To convert a single DCU save file:
1. Open a DOS window on your desktop by selecting the DOS
Prompt icon from the appropriate Start menu folder. The
location of this icon will vary, depending on your system
setup.
2. Use the DOS change directory (CD) command to go to the
directory specified during installation for your I/NET 2000
program files (the default is C:\INET2000).
3. Use the DOS change directory (CD) command to open the
SAV directory where DCU save files are stored.
4. Type in the following command:
a. Type DBCONV51.EXE (the program name).
b. Type a space.
c. Type in the name of the DCU save file (example:
DCU1401.SAV). The completed command will look
like this:
DBCONV51.EXE DCU1401.SAV
d. Press
<Enter>
.
e. Repeat as desired to convert other save files.
5. When you are finished converting the DCU save files, type
EXIT
and press
<Enter>
, or click on the X in the upper right
hand corner of the DOS window to close it.