TAC I/NET 2000, Начало работы

Страница: 34 / 74

InetAMT.mdb File Conversion Utility I/NET Conversions
3-6 I/NET 2000 Getting Started
3. Select the
Tenant
range to be converted. For an initial
upgrade installation, you should convert all tenants (1
through 256).
4. Enter the
Directory
where the files are stored, or use the
Browse button to locate the directory manually.
5. Select the
Version
for the Target File. This is the version you
are upgrading to.
6. Type in the Directory where the converted files are stored, or
use the Browse button to locate the directory manually. This
option allows you to specify a different directory for the
converted files, so that you may keep both versions.
Note: If you store the converted files in a different directory, make sure that
your I/NET 2000 system configuration gives the proper directory for
the converted files.
7. Click on the Convert button to begin the conversion process.
The Conversion Details section of the display will show the
progress of the conversions.
8. When the conversion has finished running, click the Close
button to exit the program.
InetAMT.mdb File Conversion Utility
This utility converts the INETAMT database into the format
required by I/NET2000 version 2.0. There are no parameters for the
user to enter, since the INETAMT requires a specific database name
and location.
Figure 3-5 on page 3-7 shows the dialog for this
utility.
1. Click on the
Convert
button to start the conversion. If the
INETAMT database is already in the proper version, the
Convert button will be grayed-out and unavailable.
2. After the conversion has been performed, click on the
Close
button to exit the program.