TAC I/NET 2000, Начало работы

Страница: 47 / 74

I/NET Configuration Editing Configuration Profiles
I/NET 2000 Getting Started 4-11
Note: Refer to the System Configuration chapter in TCON237, I/NET 2000
Technical Reference Guide, for information on system and network
configuration.
To define a reference host:
a. Select an entry in the Reference Hosts list box and
double-click, or click
Modify
. The IP address dialog
box, shown in Figure 4-7 , displays.
b. Enter the IP address of the reference host and click
OK
.
c. Repeat these steps for each reference host (maximum of
eight) you wish to declare.
d. To delete a reference host, select it in the list box and
click
Delete
.
Workstation Options
The Workstation Options panel allows you to set file equalization
and operating mode parameters. File equalization ensures that
certain critical I/NET files are the same on every workstation. Files
that are equalized include host passwords and access control files.
Equalized files are maintained on the workstation designated as the
“filemaster”. Other workstations compare their versions of the files
with those on the filemaster and, if needed, update the files.
Note: File equalization is not available if your Link type is NetPlus Router,
Integrated Dial or Integrated NPR Dial. Refer to
“Serial Port” on
page 4-4 , for information on these Link types.
1. Choose an operating mode for this workstation from the
following options:
Figure 4-7. IP Address Dialog Box