Editing Configuration Profiles
I/NET Configuration
4-8
Link Type is Embedded 4.x Dial
Embedded 4.x Dial allows the host workstation to emulate the
78041 Tap. You must have a modem installed under Windows.
Note:
Refer to the “Communication” chapter in TCON237, I/NET 2000
Technical Reference Guide for additional information on Embedded
4.x Dial.
1.
Set the
Link type
to
Embedded 4x Dial
.
2.
Select the modem from the list of available TAPI devices in
the
Port or devices
drop-down list.
3.
Since the baud rate is controlled by Windows, the
Baud rate
parameter is not applicable.
4.
Add
a link in the Link summary:
a.
Set the
Hardware address
to 0.
b.
Set the
System address
to a number from 0–99. This
address must be unique for each link within the system.
c.
Enter a
Name
for the link.
d.
The
Dial link
checkbox is activated automatically.
e.
Click
OK
.
5.
The Embedded 4.x Dial function supports “multi-link dial.”
Repeat
to define additional links. Refer to the
“Communication” chapter in
TCON237, I/NET 2000 Tech-
nical Reference Guide
for information on multi-link dial.
6.
Proceed to
“TCP/IP Parameters” on page 4-9
Link Type is Integrated Dial or Integrated NPR Dial.
The only difference between Integrated Dial and Integrated NPR
Dial is that Integrated NPR Dial is used to call an NPR. The param-
eter settings are the same. Ensure that you have installed a modem
under Windows prior to choosing either of these settings.
1.
Set the
Link type
to
Integrated Dial
or
Integrated NPR Dial
.
2.
Select a modem from the
Port or device
drop-down list.
Содержание I/NET 2000
Страница 1: ...Getting Started I NET 2000 System TCON238 01 02...
Страница 4: ......
Страница 28: ......
Страница 64: ......
