FLANGING MACHINE
61
F-200
8.2 ADJUSTMENT OF THE HEATING STARTING POSITION
The starting position of the heating is correct, when the distance between the burner
and the clamp is about 15mm, the arm being in its upper position. The pipe end and the
pipe near the clamp are heated both as evenly. To change the distance of the burner,
adjust the position of the stop screw of the burner slide and, if necessary, also the ball
joint of the cylinder. If you want to change the ascending stroke of the burner, adjust the
stop screw on the burner arm and, if necessary, the ball joint of the cylinder. If the burner
does not centre inside the pipe, adjust the position of the bottom plate of the burner by
loosening its fixing screws (6 only) and putting the bottom plate into the correct position.
Adjustment of the heating starting position: 1.Stop screw of the slide, 2. Ball joint of the
slide cylinder, 3. Stop screw of the arm, 4. Ball joint of the arm cylinder, 5. Fixing screws of
the bottom plate, 6. Pipe clamp, 7. Burner nozzle
