FLANGING MACHINE
73
F-200
The replacement of the cutter blade
1. Unscrew the M5x12 fixing screws of the blade fasteners and remove the fasteners.
2. Install a new cutter blade and secure it in its place by tightening the fasteners.
1
2
3
Replacement of the cutter blade: 1. Cutter blade, 2. Fastener of cutter blade, 3. Fixing
screw
10.1.2 THE ADJUSTMENT OF THE FORMING TOOL FOR BEVELING
L
DANGER! Before closing the clamping jaws, make sure that they can move
freely - the jaws might crush your hands!
1. Install s=10 mm buffer plates (2 pcs). See picture, measurement B: Tube end 12-15 mm
from clamps.
B
1
2
A
3
4
The setting gauge of the pipe: 1. Pipe clamp, 2. Wing screw, 3. Slide piece, 4. Setting
gauge of the pipe.
2. Fasten the pipe into the clamp.
The thickness of the cut chip depends on the feed speed setting! The feed speed
can vary due to the running temperature of the hydraulic unit, the feed may be
faster when the machine is running hot.
