manualshive.com logo in svg

Symmetricom TimeProvider 2300, Руководство пользователя, Страница: 98 / 338

Поделиться
Скачать
Symmetricom TimeProvider 2300 Скачать руководство пользователя страница 98

98

TimeProvider 2300/2700 User’s Guide

098-00564-000 Revision A3 – July, 2013

Chapter 3  
TimeProvider 2300/2700 CLI Command Set

The IP addresses for the MGMT, ETH1 and ETH2 ports must be on different 
networks/subnets.

 

The special value of 0.0.0.0 should be used for the gateway value if a gateway 
router is not required. Support for IPv6 addresses will be added in a future release.

Command Syntax:

To provision the state of the IPv4 Ethernet interfaces for the specified port:

set ip state {mgmt | eth1 | eth2} ipv4 [enable | disable | 
restart]

To set the IPv4 address, mask and gateway of the Ethernet interfaces for the 
specified port:

set ip ip-address {mgmt | eth1 | eth2} ipv4 address 
<addrv4_value> netmask <maskv4_value> gateway 
<gatewayv4_value>

To provision the IPv4 address mode on the Ethernet management port as DHCP 
or STATIC:

set ip address-mode mgmt ipv4 {dhcp | static}

To provision the DNS servers and domain for support of the DNS client function 
in Ethernet management port:

set ip mgmt dns nameserver1 { nameserver_ip_address } 
nameserver2 {nameserver_ip_address } domain { domain_name }

Example 1:

To restart the Ethernet management interface:

tp2700> set ip state mgmt ipv4 restart

Example 2:

To enable the IP interface for packet service port ETH1:

tp2700> set ip state eth1 ipv4 enable

Example 3:

Note: 

To configure a VLAN, use the command 

set vlan

 to provision 

the IP addresses.

Note: 

For the configuration change to take effect, the interface must 

be restarted with the 

set ip state {mgmt | eth2 | eth2} ipv4 

restart

 command.

Содержание TimeProvider 2300



















































































































































































































































































































































Отзывы:

Нет отзывов