manualshive.com logo in svg

Symmetricom TimeProvider 2300, Руководство пользователя, Страница: 29 / 338

Поделиться
Скачать
Symmetricom TimeProvider 2300 Скачать руководство пользователя страница 29

098-00564-000 Revision A3 – July, 2013

TimeProvider 2300/2700 User’s Guide

29

Chapter 1  Overview

Physical Description

PTP / SyncE Input Connections

The TimeProvider 2300/2700 provides two possible PTP/SyncE input connections, 
labeled S1 and R1, although only one connection can be used at any time. The 
TimeProvider 2300/2700 features a single Ethernet 1000 Small-form Factor 
Pluggable (SFP) connection, labeled S1, for PTP/SyncE input (see 

Figure 1-7

). 

Only optical SFPs are supported. See 

Table 2-3

 for a list recommended and 

supported SFPs.

Figure 1-7.

 PTP Input Connections - R1 & S1

T1/E1 Input Connections

The TimeProvider 2300/2700 provides an RJ48c connector (

Figure 1-8

) that can 

accept the following signal types:

2.048 Mb/s (G.703/9)

2.048 MHz (G.703/13)

1.544 Mb/s (G.703)

1.544 MHz (G.703)

This port is also software configurable as a T1 or E1 output.

Note:

 A license is required to enable PTP/SyncE Input functionality 

on the TP 2700.

Note:

 A license is required to enable T1/E1 functionality.

Содержание TimeProvider 2300



















































































































































































































































































































































Отзывы:

Нет отзывов