manualshive.com logo in svg

Symmetricom TimeProvider 2300, Руководство пользователя, Страница: 134 / 338

Поделиться
Скачать
Symmetricom TimeProvider 2300 Скачать руководство пользователя страница 134

134

TimeProvider 2300/2700 User’s Guide

098-00564-000 Revision A3 – July, 2013

Chapter 3  
TimeProvider 2300/2700 CLI Command Set

To provision the sync-interval value for a Master with the Default (multicast) 
active profile:

set ptp master config eth2 default sync-interval 
<sync-interval-value>

To provision the client-timeout value for a Master with the Default (multicast) 
active profile:

set ptp master config eth2 default client-timeout 
<client-timeout-value>

To provision the VLAN ID value for a Master with the Default (multicast) active 
profile

set ptp master config eth2 default vlanid <vlanid-value>

PTP MASTER - Telecom-2008 Profile Attributes:

To provision the active profile to Telecom-2008 for PTP master:

set ptp master active-profile eth2 telecom-2008

To provision the state of the Two-Step Clock mode, for the Master with the 
Telecom-2008 (unicast) active profile:

set ptp master config eth2 telecom-2008 two-step {enable | 
disable}

– If the Two-Step Clock state is Disable, a One-Step Clock is used.

To provision the timescale to Automatic, Arbitrary or PTP for the Master with the 
Telecom-2008 (unicast) active profile:

set ptp master config eth2 telecom-2008 timescale {auto| arb 
| ptp}

– If the timescale is set to “auto”, the TP 2300/2700 will make the decision 

based on the input. The TP 2300/2700 will set the timescale to “ptp” if the 
unit is locked to gnss or ptp. The TP 2300/2700 will set the timescale to 
“arb” if the unit is locked to any other reference besides gnss or ptp (i.e., 
E1, T1 or SyncE).

To provision the state for the Master with the Telecom-2008 (unicast) active 
profile:

set ptp master config eth2 telecom-2008 ptp-state {enable | 
disable}

To provision the PTP priority1 value for the Master with the Telecom-2008 
(unicast) active profile:

set ptp master config eth2 telecom-2008 priority-1 
<priority-1-value>

Содержание TimeProvider 2300



















































































































































































































































































































































Отзывы:

Нет отзывов