2
Important Information
FCC Verification
Note
: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and the receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
These devices may not cause harmful interference, and
•
These devices must accept any interference received, including interference that may cause
undesired operation
.
IMPORTANT NOTE
All jurisdictions have specific laws and regulations relating to the use of cameras. Before using
any camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws and
regulations that prohibit or limit the use of cameras and to comply with the applicable laws and
regulations.
FCC Regulation (for USA): Prohibition against eavesdropping
Except for the operations of law enforcement officers conducted under lawful authority, no person
shall use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the
purpose of overhearing or recording the private conversations of others unless such use is authorized
by all of the parties engaging in the conversation.
WARNING
Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
•
Make sure product is fixed correctly and stable if fastened in place
•
Do not operate if wires and terminals are exposed
•
Do not cover vents on the side or back of the DVR and allow adequate space for ventilation
DEFAULT PASSWORD INFORMATION
The default, all-access username is ‘admin’, the default password is ‘
12345
’.
To ensure your ongoing privacy, we strongly recommend setting a password as soon as possible
Choose something that you’ll remember, but that others would be unlikely to guess.
IMPORTANT NOTICE - Do NOT lose or forget your password. To ensure that your
DVR has the best security possible, password recovery has been designed to be a
complicated and time consuming process. Only a select number of staff at the
Swann
Technical Support Telephone Helpdesk can assist. Password retrieval can take several
days, which means you will NOT be able to access your DVR during this time.
BATTERY INFORMATION
This product contains a removable battery.
If you need to replace or dispose of the internal battery.
The battery is located on the mainboard of the DVR. It is a primary lithium CR2032 button cell.
To access, remove and/or replace the battery:
•
Ensure the DVR is turned OFF.
NEVER
open the DVR’s case while power is connected.
•
Remove the five screws holding the cover on the DVR.
•
If replacing the battery, ensure that it is an exact match for
size
,
type
and
capacity
.
•
Be sure to safely dispose of the battery. The process for battery disposal/recycling varies from
location to location, please check with the relevant local authority for method.
BATTERY SAFETY INSTRUCTIONS
•
Do
NOT
attempt to open, puncture, disassemble or modify the battery in any way.
•
Do
NOT
subject it to sudden shock or heat.
•
Do
NOT
dispose of battery in fire.
Important Information