Suzuki 2009 LT-A750XK9, Руководство по обслуживанию

Страница: 666 / 711

Power Assisted Steering System: 6C-20
Understanding the DTC (Diagnostic Trouble Code)
A four-digit DTC is shown through the flashing pattern of the EPS indicator light. A number between 1 and 9 is
represented by the number of times that the EPS indicator light lights up in interval of 0.3 seconds and the separation
between the each digit are indicated by the light staying off for 1 seconds. In addition, the separation between the start
code and the DTC is indicated by the light being off for 3 seconds. After the start code is displayed, DTCs appear from
the smallest number code.
If no DTCs are memorized, the EPS indicator light keeps blinking by the four times at same interval.
Use of SDS
NOTE
• Don’t disconnect couplers from EPS
control unit, the battery cable from the
battery, EPS control unit ground wire
harness from the engine or main fuse
before confirming the malfunction code
(self-diagnostic trouble code) stored in
memory. Such disconnection may erase
the memorized information in EPS control
unit memory.
• DTC stored in EPS control unit memory
can be checked by the SDS.
1) Remove the seat. Refer to “Seat Removal and
Installation in Section 9D in related manual”.
2) Set up the SDS tool. (Refer to the SDS operation
manual for further details.)
Special tool
(A): 09904–41010 (SUZUKI Diagnostic
system set)
(B): 99565–01010–020 (CD-ROM Ver.20)
“f”
“b”
“i”
ON
ON
ON
OFF
OFF
ON
Ignition switch
Engine start
Output start
Mode select switch
EPS indicator light
(Malfunction exists)
EPS indicator light
(No malfunction exists)
Code 1122
I931H1630030-04
“a”: Initial minimum light ON time (About 3 seconds) “f”: Indicator light OFF time (5 seconds)
“b”: Error code interval (About 3 seconds) “g”: Normal code light ON time (1 seconds)
“c”: Code light ON time (0.3 seconds) “h”: Normal code light OFF time (1 seconds)
“d”: Main-sub code interval (1 seconds) “i”: Interval (3 seconds)
“e”: Sub code (0.3 seconds)
(A)
I931G3630019-01