Sur-Gard SG-System III, Руководство по эксплуатации

Страница: 7 / 131

CHAPTER ONE - INTRODUCTION
3
SG-Sys
tem I Operating Man
ual
1
• Network trouble detection is displayed on the LCD, printer and automation software.
• Static IP address for programming of the network protocols.
• Data network polling environment for replacement of an existing DVACS network. Meets the 90-second ULC requirement for this
option.
• Ability to receive IP alarm messages from compatible communicators in either SIA or Contact ID.
• The T-LINK accounts and data encryption keys will be stored in the local line cards IP table.
NOTE: The SG-DRL3-IP can receive data from all DSC IP communicators. Please see the communicator man-
ual for compatibility limitations.
Approvals
Industry Approvals
• UL 1610 Central Station Burglar Alarm Units
• UL 864 Standard for Control Units and Accessories for Fire Alarm Systems
• CAN/ULC-S304-06 Signal Receiving Centre and Premises Burglar Alarm Control Units
• CAN/ULC-S559-04 Equipment for Fire Signal Receiving Centres and Systems
• FM approved
• EN60950-1:2006 Standard for Information Technology Equipment.
• AS/NZS 60950.1:2003 Information Technology Equipment - Safety
• CISPR22 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurements
• EN50130-4 Immunity requirements for components of fire, intruder and social alarm systems
This equipment shall be installed in accordance with the requirements of NFPA72, NFPA70, UL827 and the authority having jurisdiction.
SG-System III with SG-DRL3-IP Line Card is ULC listed for active communication channel security level A1 - A4 when used in conjunc-
tion with T-Link TL250 and T-Link TL300
, TL260, TL260GS, GS2060 Internet/Intranet and/or GSM-GPRS alarm communicators. For this
type of application the supervision and encryption features have to be enabled.
For ULC Installations the equipment shall be installed in accordance with the requirements of ULC-S561 and ULC-S301 Standards and the
authority having jurisdiction.