Sur-Gard SG-System III, Руководство по эксплуатации

Страница: 48 / 131

CHAPTER FIVE - ADVANCED PROGRAMMING
45
SG-System I Operating Manual
5
Each profile is made up of Static Options and Dynamic Options. The static options are the same for all profiles, but the dynamic options can be
programmed specifically per hunt groups, panel type, etc. By receiving the DNIS or Caller ID, the appropriate profile can be selected through a
look-up table "stored" on the line card.
Profile 0 is the default. When no Caller ID or unknown DNIS is received, or when the received number does not point to a profile, the default
will be used.
Profiles are used to reduce on-line time, and for specific customers or panel/format types, one can have a profile with certain handshakes sent
first. Also, some formats require certain options, and this can be pre-defined as well. Profiles allow for a more customized system. Rather
than having a line card (or a receiver itself) devoted to certain customers, the SG-System III can handle any format at any time through the
use of profiles. Each line card holds its own look-up table that can be shared through line pools, or shared within the entire receiver. Two
types of tables are available, but only one type can be chosen. The first type, which consists of 100,000 entries, is used strictly with DNIS of
up to 5-digits.
Table type 1:
The second type is used if ANI-Caller ID and/or DNIS are received, and can consist of up to 10,000 entries, with Caller ID or DNIS of up to
10 digits.

Table type 2:
Profile 0
(Default)
Profile 1 Profile 2 ~ Profile 63
00
2F
Static Options - identical for all profiles
30 Dynamic
Options
unique for
each profile
30 Dynamic
Options
30 Dynamic
Options
30 Dynamic
Options
~
FF FF FF FF
DNIS Received Profile# to be used
00001
00002
00003
...
99999
01
03
24
...
45
Caller ID Number Convert Data Profile
05 603000
05 603001
05 603002
05 603003 Not Used
Not Used
Not Used
Not Used 0
1
2
3
DNIS Number Convert Data Profile
12345
12346
1234 54321
54322
54333 0
1
2