Sur-Gard SG-System III, Руководство по эксплуатации

Страница: 68 / 131

CHAPTER FIVE - ADVANCED PROGRAMMING
65
SG-System I Operating Manual
5
SG-DRL3 Option 75: Receiver Number

SG-DRL3-2L Option 175/275: Receiver Number
Default (01)
The receiver number is used for sending signals to the central station software. Refer to the manuals for any central station automation soft-
ware being used to determine if there are any special requirements for this number. Also, check the numbers used for any other receivers in
the station to ensure that numbers are not duplicated.
SG-DRL3 Option 76: Accounts 3/x to 4/x

SG-DRL3-2L Option 176/276: Accounts 3/x to 4/x
Default (00)
00 - Disabled, if the alarm is reported in 3/1, 3/1 extended, BFSK, 3/2 or 3/8 ACRON formats, a leading space will be communicated in front
of the 3-digit account codes.
01 - If the alarm is reported in 3/1, 3/1 extended, 3/2 or 3/8 ACRON formats, a leading '0' (zero) will be communicated in front of the 3-digit
account codes.
02 - Alarms communicated to the computer. If the alarm is reported in 3/1, 3/1 extended, 3/2 or 3/8 ACRON formats, a leading '0' (zero) will
be communicated in front of the 3-digit Account. And a '0' (zero) will be communicated in front of the 1-digit alarm code for the above for-
mats as well as 4/1 format.
04 - If the panel is reported in SIA two leading '0' (zeros) will be communicated in front of the 3-digit account.
EX: S1011[#00AAA|Nri0/FH00]
05 - If the alarm is reported in 3/1, 3/1 extended, 3/2 BFSK, SIA, 3/8 ACRON formats then a leading '0' (zero) will be communicated in front
of the 3-digit account.

If the panel is reported in SIA, two leading '00' (zeros) will be communicated in front of the 3-digit account.
06 - If the alarm is reported in 3/1, 3/1 extended, 3/2 BFSK, SIA, 3/8 ACRON formats then a leading '0' (zero) will be communicated in front
of the 3-digit account and a '0' (zero) will be communicated in front of the 1-digit alarm code.
07 - If the alarm is reported in 3/1, 3/1 extended, SIA, 3/2 BFSK, 3/8 ACRON formats then a leading '0' (zero) will be communicated in front
of the 3-digit account.
SG-DRL3 Option 77: Digit Replace

SG-DRL3-2L Option 177/277: Digit Replace
Default (00)
This option works in conjunction with Option A2/1A2/2A2. When Option A2/1A2/2A2 is enabled and Option 77/177/277 is programmed
with an ASCII value, the receiver will replace or insert an account code digit. Option A2/1A2/2A2 determines how to replace or insert a
digit.
To replace a digit, set Option A2/1A2/2A2 to 0x where x is the digit to be replaced. To insert a digit, set Option A2/1A2/2A2 to 8x where x
is the digit in the account code, after which will be the inserted digit.
Example 1 (replacing):
Ex: 1RRLLLsssssssAAAsXsssY[DC4]
Ex: 1RRLLLssssss0AAAsXsssY[DC4]
Ex: 1011ssssss0AAAsXss0Y[DC4]