manualshive.com logo in svg

Sur-Gard SG-System III, Руководство по эксплуатации

Поделиться
Скачать
Sur-Gard SG-System III Скачать руководство пользователя страница 6

CHAPTER ONE - INTRODUCTION

2

SG-System I Operating Manual

1

Figure 1-1, SG-System III

The SG-System III is a multi-platform receiver intended for remote monitoring of commercial fire and burglary systems. 
The SG-System III equipped with SG-DRL3/SG-DRL3E/SG-DRL3-2L/SG-DRL3-IP can monitor up to 48 telephone lines, 24 IP communi-
cation line cards, or a combination of the two. The SG-System III time and date stamps all received alarm signals which are then transmitted 
to a central station computer via TCP/IP or RS-232 port; transmitted directly to a printer using the parallel printer port, RS-232 printer port 
and/or TCP/IP; and viewed on the LCD of the front panel while the receiver is in the manual state. System configuration and phone line pro-
files can be programmed using a PC with SG-Systems Console or locally using the scroll buttons and LCD. Each shelf can house up to 12 
SG-DRL3, SG-DRL3E, SG-DRL3-2L or SG-DRL3-IP in any combination. 

System Overview

SG-DRL3/SG-DRL3E/SG-DRL3-2L

• Patented Caller Identification (Call Display) capability
• Patent pending AHS (Automatic Handshake selection)
• Patented virtual configurations
• Non-volatile memory on line cards for programming and event buffer
• Flash download for software upgrades for all supported line cards and the SG-CPM3
• DSP technology (patent pending)
• Up to 64 different options set (profiles per line card)
• Up to 8 different handshakes per profile
• Large, easy to read LCD (Liquid Crystal Display)
• All modules function individually to help ensure uninterrupted operation during hardware or software upgrades
• All cards are 

Hot Swappable

. Cards can be removed and replaced without removing power from the system or compromising the sys-

tem performance

• 24 line cards maximum per redundant receiver
• 512-event memory buffer on each individual line card
• Real-time clock
• One parallel printer port, one serial printer port, one serial automation port and one ethernet (10/100BaseT) connection per rack
• Events can be manually acknowledged by an operator.
• Programmable serial ports
• Continuous verification of the computer-receiver links with the 'heartbeat' function
• Fast transmission of multiple alarms to the computer and printer to ensure operator's quick response
• Telephone Line and Ethernet link supervision
• Rack mountable in standard 19 inch rack. For UL listed installations use IMRAK 1400 or other equivalent listed enclosure.

SG-DRL3-IP

SG-DRL3-IP line card features include the following:

• Provides higher line security than conventional dial up panels with the polling feature.
• Quicker transmission since dialing or handshaking is not required.

DG009579

Содержание SG-System III




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды