Supero FatTwin F627R2-F73, Руководство пользователя

Страница: 15 / 144

1-5
Chapter 1: Introduction
1-3 Server Chassis Features
The following is a general outline of the main features of the F424BD server chassis.
System Power
The F424BD chassis model includes four high-effi ciency 95%+ Platinum certifi ed
redundant 1280 Watt power supplies. In the unlikely event your power supply fails,
replacement is simple and can be accomplished without tools.
SAS/SATA Subsystem
The F424BD supports up to eight (8) hot-swap 2.5" SAS/SATA drives in trays for
each node for a total of thirty-two (32) drives. These drives are hot-swappable units
and are connected to the chassis and serverboard for power and control.
Note: The operating system you use must have RAID support to enable the
hot-swap capability of the drives. For more information, visit our Web site at:
http://www.supermicro.com .
I/O Ports
The F424BD is an proprietary form factor chassis designed to be used in a 4U
rackmount confi guration. The F424BD chassis provides one low-profi le add-on
card slot, a VGA port, two USB 2.0 ports, one IPMI Ethernet port and two gigabit
Ethernet ports per node.
Cooling System
The F424BD chassis accepts eight (8) 8-cm system fans powered from the
backpane. When one of the motherboard nodes is removed, another motherboard
will continue to operate the fans.
Air Shrouds
The F424BD chassis requires air shrouds for each node to direct the airfl ow where
cooling is needed. The air shroud will differ for different motherboards. If using a
motherboard which is not the default in the chassis, refer to the optional parts in
the Appendix of this manual, or the Supermicro Web site at www.supermicro.com
to puchase the proper air shroud.