Sundance Spas Claremont 980 Series, Руководство пользователя

Страница: 67 / 88

Page 61
980™ Series
13.5 Pillow Care
Remove and clean the headrest pillows as needed with
soapy water using a cloth or soft-bristle brush. Always
remove the pillows when adding chemical shock treatment to the spa wa-
ter. The pillows can be returned to the spa when the sanitizer reading is
stable as recommended on the inside cover of the manual.
1. Place both hands on the pillow as shown, Figure 13.5a.
2. Press inward to curl pillow so you can grab it with
fingertips, Figure 13.5b.
3. Gently pull upward on pillow to release the mounting
stud from receptacle on spa shell, Figure 13.5c.
4. Wash pillow(s) in a mild detergent soap and warm water
solution. Never machine wash your pillows or attempt to
clean them with a cleaning agent.
5. To reinstall pillows simply align pillow over the mounting
stub receptacle then gently push downward to snap in
place.
13.6 Maintaining the Hot Tub Cabinet
The hot tub cabinet requires little or no maintenance of any kind. To
clean, wipe cabinet with a clean towel and mild detergent soap solution.
CAUTION:
Never spray cabinet with a high pressure garden
hose for any reason since this action may induce an electrical
short in the hot tub’s electrical equipment.
13.7 Cover Care And Maintenance
Certain hot tub covers distributed by Sundance Spas, Inc., have a vinyl
or SUNSTRONG™/SUNSTRONG™ Extreme encasement. This vinyl
or SUNSTRONG/SUNSTRONG Extreme encasement also referred to
as the cover “skin” is attractive and durable. Regular monthly cleaning
and conditioning (vinyl) is strongly recommended and may increase the
longevity of your cover.
A.
To clean and condition the encasement (cover skin):
1. Use a garden hose to remove any debris.
2. Using a large sponge or soft bristle brush, use diluted or mild soap to
gently scrub the top.
3. Rinse and clean and do not allow soap to dry on the cover. Do not
use soap on the underside of the cover.
4. Please check with your Sundance Spas dealer for recommended
cover care and conditioning products. Use non-petroleum based
conditioners to keep the vinyl supple.
5. Do not use any solvents, abrasive cleaners or strong detergents. Do
not use products that contain silicone or alcohol.
Figure 13.5a
Figure 13.5b
Figure 13.5c