Sundance Spas Claremont 980 Series, Руководство пользователя

Страница: 51 / 88

Page 45
980™ Series
12.2 Programming the Heating Mode
Your Sundance Spas hot tub is equipped with 3 modes of heating, Figure
12.2b. An automatic mode called “Auto” where the spa’s temperature is
maintained at all times. An energy saving heating cycle called “Econ.” A
mode that will only activate the heater during the daytime called “Day”
mode. To view additional menus, swipe the screen upward.
Note: The heater will activate when the temperature drops 2° from the
set temperature.
Tap
Heat & Filter...
to the enter the menu, Figure 12.2a. Then select one of
the heating settings.
A. Auto heating:
1. When programmed to “Auto,” the spa will maintain the water
temperature to the set temperature. Heating will occur when
necessary.
2. To select this mode, tap the “Auto” tab.
3. This is the default setting.
B.
Economy heating:
1. This is an energy saving heating program that allows the spa to heat
during non-peak hours. When programmed to “Econ,” the spa will
only be allowed to heat the water between 5:00 PM to 7:00 AM every
day of the week. The hours cannot be adjusted.
2. To select this mode, tap the “Econ” tab.
C.
Day heating:
1. When programmed to “Day,” the spa will only be allowed to heat the
water between 7:00 AM to 5:00 PM every day of the week. The hours
cannot be adjusted.
2. To select this mode, tap the “Day” tab.
6:45
Heat & Filter
Auto
Econ
Day
Auto
6:45
SETTINGS
SunCooler ...
Auto
Time & Date...
SunSmart ...
TM
TM
Water Care...
Heat & Filter...
Figure 12.2a
Figure 12.2b