Sundance Spas Claremont 980 Series, Руководство пользователя

Страница: 47 / 88

Page 41
980™ Series
11.9 Air Controls
Each jet system has its own air control. These controls allow
you to regulate the amount of air which is mixed with the water
entering through the jets. Clockwise rotation adds more air and counter-
clockwise rotation reduces air flow.
Note:
To minimize heat loss, close all air controls when spa is not in
use. Certain jets may draw air even though they are closed. This is
considered normal.
11.10 Waterfall Control
Turn waterfall control valve counterclockwise to increase
waterfall(s) output. Turn control valve clockwise to decrease
or turn off waterfall(s) output. The waterfall is on when the
circulation pump is running.
Note: It takes 2 full revolutions to change the waterfall from a full off to
a full on flow rate. When the waterfall is in the OFF position some water
may still flow through. This is considered normal.
11.11 Fragrance Dispenser
Located under the lid, of the right hand SunCooler, is the “SunScents
™
Fragrance Dispenser” (pages 23 and 28). It is designed to contain
packages of a specially made fragrance available from your Sundance
Spas dealer. The fragrance is carried into the hot tub water by the air com-
ing through the injector system when the air blower is on.
WARNING:
TO DECREASE RISK OF PERSONAL IN-
JURY.
• Always turn off the air blower before removing or installing
SunScents dispenser cap to reduce the risk of by having the
dispenser and/or cap fly up.
• Use only Sundance SunScents fragrances in your new hot tub,
as the tub has not been tested for use with any other manufac-
turer. Never use this dispenser for any other type of fragrance.
• Never remove the SunScents beads from their plastic cage for
any reason! This can cause damage to the spa equipment and
plumbing lines.
• The beads can also be ingested creating a chocking or
poisoning hazard. Keep away from children.
• Install bead cage directly into SunScents dispenser.
• Always make certain that the dispenser cap is securely in
place before operating the hot tub’s air blower, to avoid
the cap from flying off when the blower is activated.
!