Chapter 3
Establish Communication With ILOM Server Module SP
37
Edit IP Address Assignments Using an
Ethernet Management Connection
Use the following procedures to manage service processor(s) IP assignment(s) over
an Ethernet management connection:
■
“Edit Existing IP Addresses in ILOM Using the Web Interface” on page 37
■
“Edit Existing IP Address(es) in ILOM Using the CLI” on page 38
▼
Edit Existing IP Addresses in ILOM Using the
Web Interface
Follow these instructions using the ILOM web interface to edit existing IP
address(es) that have been assigned to a server SP or CMM.
1. Using a browser-based client, type the IP address of the server SP or CMM in
the browser address box then press Enter.
The ILOM Login screen appears.
2. In the ILOM Login screen, log in as an Administrator by entering an
administrator user name and password.
Tip –
You can log in to ILOM using the preconfigured Administrator account
shipped with ILOM:
root/changeme
.
The ILOM interface appears.
3. In the right pane of the ILOM interface, click Configuration --> Network.
The Network Settings page for the server or CMM appears.
4. To edit IP addresses assigned to the SP interfaces, do the following:
a. Select the radio button for
Use The Following IP Address
.
b. Enter values for IP Address, Subnet Mask, and Gateway in the text boxes.
Typically, after assigning (or changing) an IP address the connection made to
ILOM using the former IP address will time out. Use the newly assigned IP
address to connect to ILOM.
