24
Sun Blade X8400 Server Module Installation Guide • March 2008
▼
Apply Main Power to Server Module SP Using
the Power Button
1. Verify that standby power is on.
In standby power mode, the OK power LED on the front panel of the server
module blinks (0.1 second on, 2.9 seconds off).
2. Use a pointed object or stylus to press and release the recessed Power button on
the front panel of the server module.
When main power is applied to the host, the Power/OK LED above the Power
button displays a solid green light.
Troubleshooting the Server Module Power-On
State
If the server module is not receiving power, consider the following:
■
The server module SP power policy in ILOM determines whether or not main
power is applied to the blade SP at boot time. By default (out of the box), standby
power is automatically applied to the server module SP. For more information
about the server module SP power policy options, see the
Blade SP Power Policy
topic in the
Sun Blade 8000 Series Online Information System
at:
http://docs.sun.com/app/docs/coll/blade8000
Figure Legend
1. Server module OK LED
2. Server module Power button
