16
Sun Blade X8400 Server Module Installation Guide • March 2008
■
73-Gbyte (15K RPM) SAS Drive
■
146-Gbyte SAS Drive
■
80-Gbyte SFF SATA Drive
The server module is shipped with two HDD filler panels in slots labeled HDD0 and
HDD1.
Use the following procedures to remove the HDD filler panel from the server
module and to install the HDD into the vacant HDD slot of the server module.
Caution –
If you are not installing a hard disk drive, do not remove the HDD filler
panel from the server module. The HDD filler panels are required to meet FCC
standards for EMI.
Caution –
The following HDD procedures describe a new installation of a server
module in a powered-down chassis. The procedure is different if you are adding or
replacing a server module using a hot-plug operation. For more information about
server module hot-plug operations, see the service and hot-plug component topics in
the
Sun Blade 8000 Series Online Information System
at:
http://docs.sun.com/app/docs/coll/blade8000
