30
Sun Blade X8400 Server Module Installation Guide • March 2008
ILOM Connection Setup Worksheet
Use the following worksheet in
TABLE 3-1
to gather the information that you will
need to establish communication with ILOM.
TABLE 3-1
Initial Setup Worksheet to Establish Communication With ILOM
Information for Setup
Requirement
Description
Local Serial Console
Connection
Optional -
if
using DHCP to
assign initial IP
address
Mandatory -
if
DHCP server is
not utilized to
assign initial IP
address
If you are not utilizing a DHCP server to assign IP addresses to the server
SP or CMM, you must establish a local serial console connection to ILOM
via the serial management port on the server or Chassis Monitoring Module
(CMM).
For more information about how to attach a serial console to a server, see
“Attach Local Serial Console to the Server Module” on page 25
.
Remote Ethernet
Management
Connection
Optional
To access ILOM’s full range of management functionality, you must connect
your local area network to the network management port of on the CMM.
For more information, see
“
Attach CMM Network Management Cable” in
the
Sun Blade 8000 Series Installation Guide
.
