Chapter 2
Server Module Installation and Power-On
21
Caution –
The following procedure is for new installations in a powered-off chassis.
If you want to install or remove a server module using a hot-plug operation, see the
Service and Upgrades
topics in the
Sun Blade 8000 Series Online Information System
at:
http://docs.sun.com/app/docs/coll/blade8000
▼
Remove Server Module Filler Panel
1. In the front of the chassis, locate the server module filler panel to be removed.
2. To unlatch the server module filler panel from the chassis, press the button on
the ejector lever handles at the top and bottom; then pivot out and raise the top
ejector lever and lower the bottom ejector lever.
3. Hold the ejector levers and pull the filler panel out of the chassis slot.
▼
Install Server Module Into Chassis Slot
1. Unpack the server module (box labeled Sun Blade), then locate the vacant
server module slot in the front of the chassis.
Caution –
Do not use the ejector levers to carry the server module. The ejector
levers should only be used to seat the server module in the chassis. The levers are
not designed to support the weight of the server module.
2. Align the server module with the vacant server module slot. Ensure that the:
■
Server module indicator lights on the front panel are facing toward you.
■
Video, keyboard, and mouse connectors are at the bottom.
■
Server module ejector levers are fully opened.
