36
Sun Blade X8400 Server Module Installation Guide • March 2008
Typically, after assigning (or changing) an IP address the connection made to
ILOM using the former IP address will time-out. Use the newly assigned IP
address to connect to ILOM.
Command
Description and Example
set pendingipaddress=
Type this command followed by the static IP address that
you want to assign to the server SP.
For example, typing:
set pendingipaddress=129.144.82.26
would tell ILOM to assign
129.144.82.26
as the IP
address to the server SP.
set pendingipnetmask=
Type this command followed by the static NetMask
address that you want to assign to the server SP.
For example, typing:
set pendingipnetmask=255.255.255.0
would tell
ILOM to assign
255.255.255.0
as the NetMask address
to the server SP.
set pendingipgateway=
Type this command followed by the static gateway
address that you want to assign to the server SP.
For example, typing:
set pendingipgateway=129.144.82.254
would tell
ILOM to assign
129.144.82.254
as the Gateway
address to the server SP.
set pendingipdiscovery=
Type the following command to tell ILOM that you want
to set a static IP address on the server SP.
set pendingipdiscovery=static
set commitpending=true
Type this command (
true
) to assign the network settings
specified.
For example:
set pendingipaddress=129.144.82.26
set pendingipnetmask=255.255.255.0
set pendingipgateway=129.144.82.254
set pendingipdiscovery=static
set commitpending=true
