TCV e2 User Manual
7 of 36
P/N 857414 Rev A
07/01/2020
10.
Interface 1 Torque/Angle Status OK
–
Illuminates green when accepted.
11.
Interface 1 Torque Status NOK
–
Illuminates red when rejected.
12.
Interface 1 Angle Status NOK
–
Illuminates red when rejected.
13.
Tool Status Indicator
–
This decimal point indicates the tool has not communicated with the
controller or the radio signal strength is below the recommended minimum level for use.
14.
Programming Indicator
–
This decimal point indicates the controller is trying to program the
tool.
NOTE: Interface 2 status indicators operate in the same manner as the Interface 1 status indicators.
The run screen for an SLTC-FM tool displays
The run screen for a TAC tool can display the following:
Pressing ENT while on the run screen will replace the batch count with the click torque value.
Pressing ESC will return to the previous format.
T04 OK
1/3
•
Tool Number
•
Tightening Status
•
Batch Count
•
Tool Number
•
Tightening Status
•
Peak Torque
•
Batch Count/Click Torque
•
Angle
T04 OK P 109.90
C 105.6 0°
T04 OK 109.90
1/3 0°
