Sturtevant Richmont TCVe2, Руководство пользователя

Страница: 21 / 36

TCV e2 User Manual 21 of 36 P/N 857414 Rev A
07/01/2020
572
Name Data Type Description
ARRAY of
STRUCT of: Parameter selection for each of the 2 interfaces. Each array entry
corresponds to an interface.
Item Number SINT Instance number of item to run on the interface. Deactivate any running
parameter or job if 0.
Reserved SINT Reserved in this product. Set to 0.
Batch Reset SINT When this value changes, the batch count of the currently running
parameter on the interface is reset.
Suspend BOOL When set, suspends on the interface without stopping a running
parameter or job.
Batch SINT Sets the batch size for the selected parameter. If this value is 0, the
parameter size stored in the TCVe2 will be used.
VIN SINT[25] The VIN to be used for tightenings performed on the interface
Total size: 60 bytes
Input (T->O) Connection Points
This section defines the connection points are used by TCVe2 to send output data to the network.
•
51x, 52x: Last tightening data
•
53x: Current qualifier status
Input Connection Points for Last Tightening Data
The connection points in this group will contain data about the last tightening. As such, they are not
updated after a parameter or job selection until a tightening occurs.
512
Name Data Type Description
ARRAY of
STRUCT of: Last tightening data for each of the 2 interfaces. Each array entry corresponds
to an interface.
Tightening ID DINT ID number of the last tightening
Time SINT[6] Timestamp of the last tightening
Reserved INT Reserved in this product. Set to 0.
Reserved SINT Reserved in this product. Set to 0.
Parameter SINT Number of the parameter that produced the tightening
Tightening Status BOOL Indicates if the last tightening was accepted as valid.
Count SINT Number of results performed in the current batch for the parameter.
Batch SINT Number of results required for a batch in the parameter.
Total size: 34 bytes