Stryker 4100 Series, Инструкция по эксплуатации

Страница: 9 / 184

www.stryker.com 7
4100-005-700 Rev-AB EN
Pin Collet (REF 4100-125-000)
NOTE: If the System 6 Small Aseptic Battery
Kit REF 6127-000-000 will be used with CD4
Handpiece REF 4405-000-000, use the adjustable
pin collet REF 4100-126-000 instead of the pin
collet REF 4100-125-000.
This collet holds pins having diameters from
0.078 – 0.125 inch (2.0 – 3.2 mm). Length:
88.6 mm; Height: 143.3 mm; Diameter: 23.2 mm;
Weight: 191.6 g
Pin Collet (REF 4100-126-000)
See the instructions for use supplied with this
attachment.
Pin Collet (REF 4100-225-000)
See the instructions for use supplied with this
attachment.
Instructions
To Insert a Wire or Pin
1. Load the wire or pin into the nose of the collet
or back cap of the handpiece.
2. Move the safety switch out of the safety
position.
3. Squeeze the wire advance control lever against
the instrument to hold the wire at the desired
length exposed from the distal end of the
instrument.
4. Hold the wire or pin against the bone, then
depress the trigger to drive the wire or pin.
5. To obtain additional wire length for inserting,
release the wire advance control and pull back
the instrument. Then, squeeze the wire advance
control lever and the trigger to drive more wire.
To Remove a Wire or Pin
1. Place the nose of the collet over the free end
of the wire or pin, and then advance the collet
as far as possible.
2. Squeeze the control lever to grasp the wire
or pin.
3. Depress the trigger on the handpiece and pull
the handpiece and wire or pin away from the
bone.
NOTE: To withdraw threaded pins, squeeze the
wire advance control lever and then depress the
reverse trigger.
Duty Cycle
See the instructions for use supplied with the
handpiece.
Drill and Reamer Attachments
Description
Trinkle Drill (REF 4100-160-000)
Accepts tools such as drill bits and automatic
screwdrivers with standard Trinkle fitting. Length:
83.8 mm; Diameter: 25.0 mm; Weight: 137.7 g
Trinkle Reamer (REF 4100-260-000)
Accepts tools such as drill bits, automatic
screwdrivers and flexible reamers with standard
Trinkle fitting. Utilizes low speed and high torque.
Length: 107.6 mm; Diameter: 28.7 mm; Weight:
241.7 g
DHS Reamer (REF 4100-215-000)
Accepts tools such as drill bits, automatic
screwdrivers and flexible reamers with standard
DHS fitting. Utilizes low speed and high torque.
Length: 103.7 mm; Diameter: 28.7 mm; Weight:
233.7 g