Stromag SIDEOS Box 2, Руководство по установке и обслуживанию

Страница: 17 / 19

SIME Brakes
13/05/16
M10054-02-A
Installation and maintenance
SIDEOS Box 2
16/17
9 - STARTING-UP REPORT
APPLICATION…………………………….............. CRANE N° ………………………....…. Place :………………......................
SIDEOS Box 2 N° ……………
LIMIT SWITCH 51 Type :..………………................................. N° ……………
Reminder :
The frequency provided by the
encoder at nominal speed of the
machinery must be lower than
1000Hz.
SIDEOS One PARAMETERS SETTING see ch.8
Customer data SIDEOS One parameters
Number of encoder pulses pulses NC = pulses
Nominal speed rpm NS = rpm
Deceleration time s DT = s
Mechanical slacks ° VS = pulses
Speed 1 rpm SP1 = rpm
Speed 2 rpm SP2 = rpm
Speed 3 rpm SP3 = rpm
Encoder rotation checking Y/N RC =
% Differential speed % DS = %
Differential speed Y/N
TS =
Dynamic slipping Y/N
ELECTRICAL CONNECTION OK
Protection and connection of mains input
Mounting and connection of the encoder
Speed contact
Connection of the feedback loop : NC contact
Periodic test
ACTION OF THE OUTPUT CONTACTS TOWARDS
è
Alarm Electrical Stop Service brakes Emergency brakes Connection
System Fault Required
Overspeed
Forbidden Forbidden Required
STARTING UP OK
Autotest
Lifting operation without fault
System fault triggering : Encoder fault
System fault triggering : Speed contact fault
System Fault triggering : Contactor 1 and 2 fault
Overspeed triggering
Differential Speed triggering
Static Slipping triggering
Dynamic Slipping triggering
TEST made by : ……………………………………..……………., on ……………………… Signature :
Document to be kept with no time limit in the equipment file and provided to GKN Stromag
France for all request of technical assistance.
SIME Brakes
www.stromag.com - Customer service / Tel. : +33(0)1 49 90 32 20 / Fax : +33(0)1 49 89 06 38