SIME Brakes
13/05/16
M10054-02-A
Installation and maintenance
SIDEOS Box 2
10/17
Non contractual photographs.
Instructions of this manual must be adhered to, to obtain the performance and the safety of operation of the equipment.
Encoder and limit switch 51 questionnaire
No. Q01390-01
Dimensions limit switch 51
No. T10003-01
Installation and maintenance SIDEOS One
No. M10054-01
Limit switch 51 - Stromag
Catalog
No. D142
Installation and maintenance No. 151-00004
EMC
No. 900-00001
5-3 Encoders selection
a) Electrical characteristics
Supply voltage range = 10…. 30V
Push-pull output with inverted signals
Maxi no-load consumption = 160mA
Standard shielded cable : 0.25 to 0.5mm²
The cable ways and connection should respect the safety
EMC-regulations.
b) SIDEOS One encoder resolution
Encoder
NS =
Nominal speed maxi
(NC < 60000 / NS)
Rotation control
threshold
Encoder : RC = On
rpm
rpm
20
3000
0,6
40
1500
0,3
360
166
0,04
600
100
0,02
1024
58
0,012
1500
40
0,008
3600
16
0,004
c) Option : Encoder frequency divider
If the motor encoder delivers a frequency > 1000Hz without
the possibility to install an other encoder on the motor shaft,
the option of an encoder frequency divider can be selected.
SIME Brakes
www.stromag.com -
Customer service / Tel. : +33(0)1 49 90 32 20 / Fax : +33(0)1 49 89 06 38
