Strebel S-CBX 105 Скачать руководство пользователя

Страница: 63 / 138

12.2.3 P

ROTECTED MENU ITEMS

Some menu items are protected and only accessible via a password* The following password screen will then

appear:

Users are only allowed to change parameters not needing a password. Installers have to use the password 1122 to change parameters

protected by a password.

Changing protected/safety parameters should only be conducted by experienced, licensed

boiler operators and mechanics. Hazardous burner conditions can happen with improper

operations that may result in PROPERTY LOSS, PHYSICAL INJURY, or DEATH.

Enter the password with the following steps:

1. Use the UP/DOWN ↑↓ button to adjust the first number

2. Press CONFIRM or RIGHT → to confirm and to go to the following number

Repeat this action for all numbers to enter the password.

During this action, if you want to return to the previous screen, just press MENU or ESC to cancel. After

the password is entered in correctly, the menu item will become available.

The following menu items require a password*:

(Sub) Menu item

Location inside menu

Climatic Compensation

via ‘Heating > Climatic compensation’

Boiler

via ‘Settings > Boiler’

12.2.4 D

AERATION

EQUENCE

The “De-Aeration” sequence is a safety function that starts at every power ON and after reset of the boiler and is

used to remove the air from the heat-exchanger.

The display will show the following string during DAir sequence:

• “Dair Running”

• “Dair Error Water Pressure”

The DAir sequence can be cancelled by the user by pressing the Enter button for over 5 seconds.

12.2.5 L

ANGUAGE SETTINGS

The display has a number of different language options, such as English, French, Chinese and Italian.

BE AWARE: DO NOT set the language to the Chinese Language if you are not familiar with this language. Contact

Eco Heating Systems for instructions if the display is set to Chinese and needs to be reset to another language.

Please follow the next steps, which describe how to set the display to a specific language:

1. From the Status Overview, press the MENU button once

2. Select “Settings” (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM button

3. Select “General Settings” (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM button

4. Select “Language” (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM button

5. Select the desired language (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM button

Language
English

Italiano

中文

INTERNATIONAL ▼

WARNING

Содержание S-CBX 105











































































































































Результаты поиска

Содержание S-CBX 105

Отзывы:

Похожие инструкции для S-CBX 105

Бренды по названию

Популярные бренды

Strebel S-CBX 105, Руководство по установке, эксплуатации и техническому обслуживанию

Результаты поиска

Содержание S-CBX 105

Отзывы:

Похожие инструкции для S-CBX 105

Бренды по названию

Популярные бренды