Storz CALCULASE II, Инструкция по эксплуатации

Страница: 63 / 72

55
ſƠƘƛƞƖƕƝƘƕ
ƃƚƐƗƐƝƘƯ Ɵƞ ƭƛƕƚƢƠƞƜƐƓƝƘƢƝƞƙ
ơƞƒƜƕơƢƘƜƞơƢƘ ( ƍżƁ )
Appendix
Electromagnetic compatibility (EMC)
information
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Table 1
Guidance and manufacturer’s declaration – electromagnetic emissions
The CALCULASE | II model 27 7502 20-1 is intended for use in the electromagnetic environment speci Ƃ ed below.
The customer or user of the CALCULASE | II model 27 7502 20-1 should ensure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The CALCULASE | II model 27 7502 20-1 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to cause interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The CALCULASE | II model 27 7502 20-1 is suitable for use in all establishments
(e.g. hospitals and doctors’ of Ƃ ces) including domestic establishments and those
directly connected to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Complies
Accessories and cables which have been shown to comply with IEC 60601-1-2:
Cable type Shielded Length [m] Ferrite Used for
Footswitch with cable Yes 3 No Activating the unit functions
Power Cord
10 A with non-heating
appliance connector
No 5 No Power supply