8. E A SY VA LV E
Remove Valve
Balloon with Filling
Chamber
Caution! Hot surface!
Do not touch any compo-
nents of the Filling Chamber
(except at the textured grip)
until they have cooled down
after the Valve Balloon has
been Elled.
Never leave the Filling Chamber on top
of the hot air outlet of the VOLCANO
CLASSIC as long as the heater is on,
except when Elling the Valve Balloon.
Non-observance can lead to an over-
heated Filling Chamber, which might
burn onecs Engers. Detach the Valve
Balloon from the Filling Chamber.
When you do so, the Valve is automat-
ically closed so that the vapors in the
Valve Balloon cannot escape.
Caution! Hot surface!
Never leave Filling Chamber
on VOLCANO CLASSIC
When the Valve Balloon is Elled, switch
off the air pump and remove the Bal-
loon together with the Filling Chamber.
To do so, hold the Filling Chamber Cap
at the textured grip.
Watch vapor density
ok
the vapor density in the Valve Balloon
(see Chapter 5. fFactors inFuencing
vaporization“, page 58.
66
