6. GENER A L INFOR M ATION A BO U T
T HE VOLCA NO CL A S S IC
Take care that the power cord cannot
be damaged through kinking, crushing
or pulling.
Improper installation may
lead to personal injury or ma-
terial damages, for which the
manufacturer cannot be held
responsible.
6.3. Application and Operation
This Hot Air Generator was
developed for vaporizing the
plant materials listed in the
plant overview. Any other use is inap-
propriate and potentially dangerous.
For use and maintenance, the user
must always follow the instructions
given in theses Instructions for Use.
In case of doubt, or malfunction, im-
mediately switch off the Hot Air Gen-
erator and pull out the power plug from
the socket. Do not try to remedy the
defect yourself. Contact our Service
Center directly.
Allow the device to cool down before it
is packed away.
6.4. Care and Maintenance
Before any maintenance work is done,
the device has to be switched off and
the power plug has to be unplugged
from the power supply.
6.1. Unpacking
Take out the Hot Air Generator and the
accessories from the box. Immediate-
ly after unpacking check whether the
Hot Air Generator, the accessories, the
power cord and the power plug are all
included in the delivery and work prop-
erly. If you notice any defects, inform
the seller or the delivery agent imme-
diately.
The packing material (plastic
bags, polystyrene parts, box-
es etc.) must be kept out of
the reach of children as it is a potential
source of danger.
Please dispose of the packing material
in a proper and environmentally friend-
ly manner.
We recommend keeping the original
packaging in case it is required later
(transport, STORZ & BICKEL Service
Center etc.).
6.2. Installation
Before installing the Hot Air Generator,
make sure that the information given
on the type label on the underside of
the device corresponds to the local
mains supply data. All parts of the
electrical system must comply with
currently applicable ofEcial regula
-
tions.
Put the Hot Air Generator on a Fat and
stable surface.
60