Slipring
Balloon Fixation Ring
Valve Cap
Valve Ring
Valve Housing
Gripper Indentation
Gripper
Valve Spring
Valve Cylinder
10. S OLID VA LV E
Opening the Slipring
Reassemble in reverse order.
10.2.1.3. Disassembling the
Filling Chamber Insert
The Filling Chamber Insert can be eas-
ily removed from the Filling Chamber.
The Filling Chamber Insert can be dis-
assembled by screwing off the hex nut.
Remove the Valve Cap and Valve Ring.
Pull out the Valve Cylinder along with
the Valve Spring of the Valve Housing.
In case of stiffness, the component
parts can be loosened by warming
them up in warm water.
Screw off Valve Cap
Disassembling the Filling Chamber Insert
10.2.1.2. Disassembling the Valve
Undo the Slipring and remove the
Valve Balloon along with the Balloon
Fixation Ring. Insert your index Enger
into the open end of the Valve Cylinder.
Push up the Valve Cylinder until you
can unscrew the Valve Cap.
80