2. E X PL A N ATION OF SY MBOL S, WA R NINGS
A ND S A FE T Y R ECOMMENDATIONS
The use of multiple sockets
and/or extension cables is not
recommended. However, if this
is absolutely necessary, only
products with a quality certificate
(such as UL, IMQ, VDE, +S etc.) may
be used, provided the specified
power exceeds the power required
(A=Ampere) by the devices that are
connected.
Operate the Hot Air Generator on a
stable and flat surface at sufficient
distance from heat sources (oven,
stove, chimney, etc.) and in a place
where the ambient temperature
cannot drop below +5°C (+41°F).
Store the Hot Air Generator in a
dry place protected against the
effects of weather. It cannot be
used in damp locations (such as
bathrooms etc.).
Keep the Hot Air Generator away
from pets (e.g. hamsters, mice) and
other animals which could damage
the insulation of the mains adapter
cord.
To pull the power plug from the
socket, pull the power plug directly,
never pull the Power Cord.
Do not put any objects into the
openings of the device.
Do not leave the Hot Air Generator
unattended during operation. After
use, switch off the heater and the
air pump.
The Hot Air Generator should be
cleaned only with a dry cloth - or
a damp cloth if absolutely nec-
essary. Before cleaning, remove
the power cord from the socket.
Never immerse the Hot Air Gener-
ator in water or in other liquid, nor
clean it with direct jets of water or
steam.
Do not expose the Hot Air Gen-
erator to rain. Do not use in the
bathroom or above water.
Never put containers containing
liquids on the Hot Air Generator.
Never operate the Hot Air Gen-
erator when it is wet or damp. If
the Hot Air Generator gets wet, it
must be checked by our Service
Center for damage to electrical
components.
Only use original STORZ &
BICKEL accessories and spare
parts.
56
