Prism6 & Crystal Reader software User Manual
46
marks on the housing or the
benchtop. When disinfection is
required,
please
contact
Technical Support.
Material necessary for the decontamination procedure:
o
Gloves;
o
Glasses;
o
Mask;
o
Laboratory coat;
o
Hydroalcoholic disinfectant solution for device surfaces commonly used for biological and
medical devices (Ex. Phagospray). Decontaminant solution for device’s surfaces used for
biological and medical devices, specifically targeting nucleases and DNA contaminations
(Ex. RNAse away). Bleach is not recommended; if its use is unavoidable, be sure to
abundantly rinse with water after the bleach treatment.
Wipes. For the detailed procedure for decontamination of the Geode, please view the
Decontamination Protocol.
•
Disposal of naica
®
system equipment
The disposal of the Prism6 at the end of the product's life should comply with the current
legislation in force in the country of use regarding electrical and electronic waste.
The Prism6 instrument should be packed and shipped back to Stilla® only after a Stilla
Technologies Service Specialist has deemed it necessary. If shipping the Prism6 is required, use
all the original packaging and cables provided upon reception of the naica® system. To prepare
the Prism6 instrument for shipment, please contact Technical Support for detailed instructions.
Ensure that no chips (Sapphire chip/Opal chip) and tray holders (Sapphire tray holder / Opal tray
holder) are left inside the Prism6 instrument for shipment.
Decontamination
Disposal
To ship the instrument back to Stilla®
