Still FM-X EW Series Скачать руководство пользователя страница 63

Страница: 63 / 360

Safety

Commissioning the FleetManager™ (variant)

Activating the access control after

delivery of the truck

CAUTION

Danger associated with use by unauthorised per-

sons
The FleetManager™ regulates the access authori-

sation to the truck. To activate the access control,

the FleetManager must be put into operation im-

mediately following delivery. This ensures that only

persons authorised by the operating company have

access to the truck.
If the FleetManager is not put into operation imme-

diately after delivery, the operator must convert the

truck to a different access control.
– Put the FleetManager™ into operation imme-

diately after delivery. Make the truck accessible

only to people who are authorised by the opera-

ting company.

– In order to convert the truck to a different access

control, contact your authorised service centre.

The FleetManager™ regulates the access

authorisation to the truck via a PIN code,

access chip or access card. This means

that the truck is effectively protected against

unauthorised access. The system can only

be activated at the customer's premises, as it

uses essential customer data. Therefore, at

the time of delivery, the truck is not protected

against unauthorised use.
In order to guarantee protection, the Fleet-

Manager™ must be put into operation imme-

diately after delivery. The operating company

is responsible for ensuring that only autho-

rised personnel use the truck.
If the operating company decides not to

use the FleetManager™ at a later date, the

operating company is responsible for the

conversion of the truck to a different access

control.

Emissions

The values speciﬁed apply to a standard truck

(compare the speciﬁcations in the "Technical

data" chapter). Different tyres, lift masts,

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды