Still FM-X EW Series Скачать руководство пользователя страница 156

Страница: 156 / 360

Operation

Handling loads

Instructions for transporting suspended loads:
• Swinging of the load is to be prevented by

using the proper driving speed and driving

manner (careful steering, braking).

• Hanging loads must be coupled to the truck

in such a way that the harness cannot shift

or release unintentionally, and cannot be

damaged.

• When transporting suspended loads, suit-

able devices (e.g. guy wires or supporting

poles) must be available so that accompa-

nying persons can guide suspended loads

and prevent the loads from swinging

• Take particular care to ensure that there is

no one in the drive direction in the driving

lane.

• If, despite this, the load begins to swing,

ensure that no person is placed at risk

DANGER

Risk of accident!
When transporting suspended loads, never per-

form or end driving and load movements abruptly.
Never drive on ascending or descending gradients

with a suspended load!
It is not permissible to transport containers holding

ﬂuids as hanging loads.

Picking up a load

NOTE

Loads may only be picked up and set down on

ﬂat surfaces.

DANGER

There is a risk to life caused by a falling load or if

parts of the truck are being lowered.
– Never walk or stand underneath suspended

loads or raised fork arms.

– Never exceed the maximum load indicated on

the capacity rating plate. Otherwise stability

cannot be guaranteed.

Only store pallets that do not exceed the per-

missible measurements. Damaged loading

equipment and incorrectly formed loads must

not be stored. Store the load so that the spec-

144

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды