Still FM-X EW Series Скачать руководство пользователя страница 144

Страница: 144 / 360

Operation

Lifting

WARNING

There is a risk of injury when changing the fork

arms; the fork arms' weight could cause them to fall

on your legs, feet or knees. The space to the left

and right of the fork is a danger area.
– Always wear protective gloves and safety

footwear when changing the fork arms.

– Ensure that no one stands in the danger area!
– Do not pull on the fork arms.
– The fork arms must always be carried by two

people; if necessary, use a hoist.

NOTE

•

For installation and removal, a transport

pallet is recommended for supporting

the fork arms. The pallet size depends

on the fork arm size used and should be

dimensioned such that the fork arms do not

protrude after being placed on the pallet.

This means the fork arms can be safely

placed down and transported.

•

Both fork arms can be pushed over onto one

side.

132

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды